Відео

What happens if u skip tge relearn? Will disconnecting battery overnight for a relearn?

great job as always.

Gracias por compartir.

I'm broke you saved my ass

I would have installed it in the Car and use the brake peddle to blead it

I wish the part was included in the description

I did the same a few years ago, then added a dipstick for the trans

What is the name of the tool you are using to push in the piston? I know you said it, but I need it written down 😅

Great tutorial! I'll be doing this repair on my rogue. Subscribed

Excellent high speed tutorial!

Bench bleeding is really unnecessary .

I do a full.swap out by dropping the return line and flushing the entire system.

Thank you so much

@TrickShiftGarage since it’s been 2 years, are they still holdin up well of you Auxito - 10S led bulbs?

And you should only put five quarts back in because the thermostat won’t open when it cold and it hold fluid in the line and radiator. Check a couple days after driving and see where it’s at. Mine has always been good with five

I can take my pan off without lowering the exhaust or raising the trans. And you don’t have to take that heat shield off. All you have to do is twist it so the low spot in the back of the pan is bet the exhaust and pull it out towards the front.

I 'm sure those expensive bolts are going to make your truck perform better. I would NOT use brake cleaner, it is chlorinated and can damage internal parts, If nothing else use carb cleaner.

Great video! I need to get a computer and camera so i can do some repair videos as well.

I take it there is no light adjustment needed? Great video.

If it did leak, what would be your step by step process in determining where it came from?

Very good video

😢❤❤❤Those are some of the toughest decisions only prayers will help

I just bought my truck, a 2015 GMC 2500HD crew cab LB 6.0 in February. Today it was about 75 degrees and I took it for a 65 mile round trip on the highway. My trans temp never went over 144 degrees. I guess I'll have to wait for hot weather or tow something heavy to get the temp up. 192,000 miles. My fluid was very brown when I bought it, so I changed it, ran the truck for a few minutes, and then changed it again.

I did just what you showed and it wouldn't come off. I'm finally of the opinion that you have to break it off. This guy is full of crap . There is so much in the way ,you have to take half the motor apart to where it looks like his video

what is wrong with the adjusters on my truck? ua-cam.com/users/shortsQkM2sUuF9Kw

Sorry is this for a rough idle?

Why don't you just install it in the car so you can use the brake pedal to bleed?

Change your CVT transmission fluid every 30k miles. Do not let it go over.

Hello. I have a 2010 Altima 2,5L 110K. I cleaned my valve cover 1 year ago but there is again little oil on it and around the pcv valve. Do I have a problem or is it the same with your altima? TY

Video is good but why are you zoomed un so close at the beginning, it makes it hard to get a great idea of where the transmission fluid dip stick is located

This looks easy enough. I’m sure I can’t mess this up! Good video thanks

Great video and slick trick using the foil 👍

that's the valve not the module

is a 2.0l in same place ?

Finally i have a vehicle that i can access the oil filter and do this process myself lol. No more removing a damn tire!!

Pardon me if you mentioned and I missed it, but at what mileage or age would you recommend changing this fluid? If you rarely use 4WD would this make a difference?

Great video! Also, Definitely... No background music. Just the natural sound and audio is fine 🙂

Thanks!

Would help to know what year the truck is.

This is my project for tomorrow if it's raining. I'm also using a gasket, but I went with a FELPRO. Thanks for taking the time to film and share your experience.

The Valvaleen squeeze bags are the move here. Flawless fill with those things.

I'd put jack stands under the front chassis for safety in case the worse happens as well as put the same amount of fluid you took out

Would reverse bleeding help this ?

Did you order these off of Amazon?

18:55 Great video guide! Very much appreciated for the video. My 2018 traverse doesn't have any of those issues,but this video will come in handy when the time comes. This is by far one of a kind vehicle that was properly built with the proper layout and placememt of every parts. When it comes to serviceable. It is the easiest vehicle ever to be service. Zero problematic. Just boom boom....done! No fuss! Try servicing hey other vehicle and you're bound to run into one problem after another because they're laid out in the most awkward place that just absolutely made zero sense that you have to tear all these other parts apart JUST to get access to one little thing.

Do you have to put a jack of somekind under the engine when removing the mount?

Thanks for the video. Nissan must be Japanese for “how to make simple tasks difficult!”

You’re a life saver !!

I watched this video three time. First to see how you did it. Next One for taking the cover off. Then again when I was stuck trying to get it back on. Working on a 13 suburban. It did fit but if I had not seen you do it I would have given up and pulled the exhaust loose. Many thanks man👍

Bonjour, j'ai auris année 2014 boîte CVT, quand je démarre le matin et je la met en position D à froid à petite vitesse, j'entends un bruit tac tac tac , mais c'est juste à froid, une fois chauffée , le bruit disparaît, prière de m'expliquer mon problème.